Ultra Low Pressure Series RO Membrane Elements
|
Introduction |
BHM, is attached to the Global 500 enterprise CHEMCHINA, researched an energy-saving product Ultra low pressure series membrane elements, suitable for low salinity water (TDS≤1000mg/L), which use the aromatic polyamide membrane materials, characterized by high rejection rate under ultra low pressure operating conditions, are widely applied in tap water, surface water desalination and purification etc.
|
Membrane element performance |
|
Model |
ULP-8040-440 |
ULP-8040-400 |
ULP-4040 |
|
Rejection rate (%) |
99.2 |
||
|
Permeate flow m3/d(GPD) |
45（11,880） |
40（10,500） |
9.6（2,500） |
|
Active membrane Area m2 (ft2) |
40.8（440） |
37.2（400） |
9.1（98） |
Note: The final stable rejection rate after testing 30 minutes as the standard rejection rate; the fluctuation range of permeate flow is 15%
|
Testing conditions |
|
Pressure (Mpa/psi) |
0.70/100 |
|
Inflow concentration(mg/L) |
500±20 |
|
Temperature(゜C) |
25±1 |
|
PH value |
7-8 |
|
Recovery rate (%) |
15±1 |
|
Maximum operating conditions |
|
Pressure (Mpa/psi) |
4.1/600 |
|
Temperature(゜C) |
45 |
|
Inflow SDI |
5 |
|
Residual chlorine concentration of inlet water(mg/L) |
0.1 |
|
Inflow PH range during continuously operating |
3-10 |
|
Inflow PH range during chemical cleaning |
2-12 |
|
Max. pressure loss of single membrane element (Mpa/psi) |
0.10/15 |
Hot Tags: ultra low pressure series ro membrane elements, China, manufacturers, suppliers, factory, buy, price
You Might Also Like
Send Inquiry