Appearance:
Gray black, cylindrical, odorless, non-toxic.
Features:
Wood columnar activated carbon is made of high quality wood chips, coconut shell, etc., which are made by crushing, mixing, extruding, forming, drying, carbonizing and activating.
Advanced:
Due to the use of high-quality wood chips and coconut shell as raw materials, the columnar activated carbon is lower than the traditional coal-based columnar charcoal, with less impurities, gas phase adsorption value and CTC. The pore size distribution of the product is reasonable, and the maximum adsorption and desorption are achieved, thereby greatly improving the service life of the product (average 2-3 years), which is 1.4 times that of ordinary coal charcoal.
Ingenuity:
Wood columnar activated carbon uses proprietary technology of non-bonded shaped activated carbon. Change the traditional method of molding with traditional binders such as coal tar and starch. It contains no binder and relies entirely on the affinity between the carbon molecules and the special properties of the raw materials themselves. Scientifically formulated and made, it can effectively avoid the blockage of carbon pores and give full play to the adsorption function of rich and developed carbon pores.
Applicability:
1, Gas phase adsorption
2, Organic solvent recovery (benzene recovery in the benzene-based gas toluene, xylene, acetate fiber industry)
3, Impurities and harmful gases removed, waste gas recovery
4, Refinery, gas station, oil depot excess gasoline Recycling.
Product Advantages:
1, The service life is 4-5 times that of ordinary coal-based activated carbon.
2, High adsorption and desorption, thereby greatly improving the recovery rate of the solvent.
3, High strength and low ash, reasonable pore size distribution.
4, Cost-effective, suitable for the recycling of all organic gases in this field.
5,The fire point is high and safe to use.
