Air adsorption principle of honeycomb activated carbon: In the past, the products of activated carbon adsorbed by exhaust gas and exhaust gas generally used fruit hull, coconut hull, coal-based columnar and amorphous granular activated carbon. Although these granular activated carbon had the same strong adsorptive capacity and developed micropore, the particle size and thickness of each granule were not easily saturated. The commonly used type of columnar activated carbon was 1.5-5.0mm and fruit hull. From 1.0 to 8.0 mm of coconut shell, it can be seen that the pore size of each fine activated carbon particle is not easy to be completely absorbed and saturated, only because its thickness and strength are not easy to be invaded by micro ions in the air, so the former granular activated carbon was dismantled and replaced before it was completely eliminated, thus wasting resources and human and financial resources, resulting in unnecessary use. Loss required
Application of honeycomb activated carbon: industrial waste gas treatment, tail gas treatment and purification, can be absorbed in organic and inorganic waste gas purification, improve environmental protection environment. Honeycomb activated carbon can be widely used in various gas purification equipment and waste gas treatment projects. Practice has proved that the purification effect is better than ordinary. The pollutants that can be removed by honeycomb activated carbon to varying degrees are: nitric oxide, carbon tetrachloride, chlorine, benzene, dimethylaldehyde, acetone, ethanol, ether, methanol, acetic acid, ethyl ester, styrene, phosgene, odorous gas, etc.
